Website Down

Seeing as my free host provider says they are doing “maintenance” my usual website is currently down (the one that has the converters, generators and cheat DB). Not sure how long it will be down for so I figured I would write a blog post about it and redirect to this blog.

I’m at a bit of a loss why the host felt the need to redirect the traffic from my site to one of those crappy ad sites but whatever.

Anyways if you want the most recent cheat database you can get it from here. You can also get the latest version of my cheat device (TempAR) from Codemasters Project. It was recently updated to work on the newly released 6.3X PRO by Coldbird/VFlame.

If you are using one of the 6.3X HENs be sure to read the instructions carefully because they are a bit different then the normal installation instructions. Also there have been some reports of it not working which I haven’t been able to reproduce :(. I want to get some kind of idea of how many people are having this problem, so if you are using 6.3X PRO please cast your vote as to whether or not TempAR works for you.

Update: the usual site seems to be working at the moment. I might leave my blog at for a while in case the problem happens again. You can visit For the converter, generators etc.

Update 2: I can confirm that TempAR is working for me with my PSP-1000 and PSP-2000 handhelds on 6.35 PRO.


39 Responses to Website Down

  1. Mr_Waffle says:

    Where’s my converter, man D: I need it.

    • raing3 says:

      Sorry, I think it will be down for a few weeks. 😦

      Codes are fairly easy to convert from NitePR to CWCheat though so you could do it manually without too much trouble. If not just PM me the codes at OneHitGamer and tell me what format you want them in and I’ll send them back to you.

  2. farmz says:


    why is it that i cant see the list of cheats,

    Tempar v1.59

    im on 6.31

    thank you very much!

    more power to you raing3!!!

    • raing3 says:

      Did you check the cheat database to make sure there are cheats for your game? It is most likely that there are no cheats available in the currently loaded database.

    • farmz says:

      i found the solution…i just rename cheat1.db to cheat.db =)

      now Tempar works on 6.31

  3. JuggerNaughts says:

    Does the screenshot function work for the 6.35 PRO? The cheats seems to work perfectly fine, but I can’t seem to take any screenshots…

    • raing3 says:

      No, I haven’t managed to work out a solution to make the screenshot function work on 6.3X yet. 😦

  4. dante999 says:


    work on psp 3000 6.31pro
    thank you~~~

    but have problem…

    cwcheat’s address = 161bf8
    i found address in TempAR = 8961bf8

    so cwcheat’s address + 8800000h = TempAR’s address

    • raing3 says:

      Yes that is correct but other stuff does need changing to make the codes work the same for the PSPAR/CWCheat cheat engine.

      You would be best just to add the CWCheat codes directly instead of trying to convert them as TempAR supports both PSPAR and CWCheat codes.

      EDIT: I was about to reply to your comment on OHG, I see you corrected your math before you posted here. 😛

  5. farmz says:


    Tempar v1.59 is working on 6.31 PRO

    i just rename the cheat1.db to cheat.db.

  6. Miguelito says:

    Please, source code of PSP Tool v1.00 😦

    *Sorry, im italian my english isn`t good.

  7. farmz says:


    my son is playing his favorite games like Dantes Inferno and Gladiators Begins. he want to cheat on those 2 games.

    i turned the cheats on and set what he likes to activate. but the cheats are not functioning.

    what is the problem?

    im sorry too for my poor english grammar.

    • raing3 says:

      Could you please tell me what the Game IDs for those particular games are? I assume Gladiator Begins is “ULUS-10528” but I’m not sure about Dante’s Inferno.

      Also what firmware, 6.31 PRO right? ISO Loader, Prometheus ISO Launcher yes? Are the games UMDs/clean scene releases or are they patched? Did codes for any other games work for you?

      I will try to look into the problem and fix the codes if necessary but make no promises as the codes could be not working for a number of reasons.

  8. kinishiro says:

    you tool is working perfectly on my PSP3004 with 6.31PRO , but i’m still knocking my head off on how to add cwcheats in the tempar cheat databases.

    any clues ?

    keep up man, your tool is awesome !!!!!!!!!!

    • raing3 says:

      You just need to open the cheat.db/cheat1.db file with something like Wordpad or Notepad++. Then just copy and paste the CWCheat codes at the top of the file.

      It should look something like this (except CWCheat codes will have “_L” instead of “_M” before the code lines).

    • kinishiro says:

      SO i just have to :
      – copy cheats from cwcheats into the dbfile
      – change the _L to _M

      and that’s it ?
      i should have done something wrong, i’ll check it soon, thanks a lot for your help

    • raing3 says:

      You only have to “copy cheats from cwcheats into the dbfile”. DON’T “change the _L to _M”, if you do the codes won’t work correctly.

    • kinishiro says:

      Cool 🙂
      Then i definitely messed up something, will fix it soon 🙂

      Thanks for your help raing3

    • kinishiro says:

      ok i just reinstalled tempar, but one thing is strange, tempar starts ,i can use cheats, but i can”t activate cheats from cheat1.db, what should i do ?

    • raing3 says:

      To use cheats from a different cheat database go to the “[PRX]” tab, scroll down to “Load cheat file” and press left/right to change the loaded DB, then press CROSS to load the DB. If you want that DB to be used by default you should then scroll down to “Save Settings” and press CROSS again.

    • kinishiro says:

      man you are amazing, replying at the speed of light !!!

      so if i’m correct, i can use cheats from cheat.db AND cheat1.db and save the activated cheats in a db file related to the game i play ?

      i hope i’m good enough at this point, so i won’t bother you anymore.

  9. Bigbow says:

    tempar works great on 6.35 and could u add to next update of the cheat database god of war ghost of sparta UCES-01473

  10. Zatachi says:

    I’m trying to put TempAR V. 1.59-2 on my PSP but i can’t get it to work :/
    I have a PSP 3001, 6.35 Pro.

    My friend has a PSP just like mine and his works fine and we both play Phantasy Star Portable 2.
    I did everything you said in you “onehitgamer” forum but it still isn’t working
    I’m doing something wrong? Raing3? Thanks in advance

    • raing3 says:

      Try using TempAR v1.59-4. Also be sure to read the installation instructions as it is different than a normal install, remember you should be using tempar_lite.prx in the game.txt for 6.3X as well as the normal version doesn’t seem to work.

  11. Zatachi says:

    Thanks I’ll give it try! I’m looking for a TempAR v1.59-4.
    If i can’t I’ll be sure to come back and ask again if you don’t mind.

    Thanks again!

  12. Mr_Waffle says:

    Thanks for putting the converter back up, sweet that my “cheat” still works 😀

  13. Atratus says:

    I have been trying to add Cheats for Dissidia Duodecim, but I can’t seem to get them to work. I have tried pasting the CWCheat entries into cheat.db, no luck. I have tried converting the CWCheat entries, the convertor returns a file but with [bad egg] at the end of each cheat. The game ID is ULUS-10566.

    • raing3 says:

      Using the converter for CWCheat PSP codes is certainly unnecessary to use them with TempAR. (hence the [bad egg])

      The cheats should have however worked after adding them to the start/end of the cheat database file, make sure you copy the “_S” and “_G” lines into the DB as well so TempAR can find the codes.

      You could also try putting the Dissidia Duodecim codes in a seperate DB file in ms0:/seplugins/TempAR/cheats/XXXX-00000.db (replace XXXX-00000 with the game id), again remember the “_S” and “_G” lines.

      Please note that this blog has been moved to

  14. Atratus says:

    Does it have to be a separate folder? Going off the file structure you typed in there, I would assume so?

    • raing3 says:

      Yes ms0:/seplugins/TempAR/cheats is a sub-folder which you will most likely have to create.

  15. Atratus says:

    Kk, do all the cheat.db files go in it?

    • raing3 says:


      Only the individual cheat files goes in ms0:/seplugins/TempAR/cheats.

      The cheat.db, cheat1.db, cheat2.db, etc. files still go in ms0:/seplugins/TempAR.

  16. Atratus says:

    Sorry, new to all this stuff. I have also tried updating it, and it still shows verison 1.59, and when I try to load the ULUS-10566, it doesn’t even access the memory stick. It just says loaded. And there is nothing loaded as far as I can tell.

    • raing3 says:

      Latest version of TempAR is 1.61 which can be downloaded from here. Just overwrite the PRX files with the ones in the download link.

      Could you please paste the codes here which you want to add?

  17. Atratus says:

    _S ULUS-10566
    _G Dissidia 012: Duodecim Final Fantasy [US]
    _C0 1000000 GIL
    _L 0x207F93F4 0x000F424
    _L 0x207FB2D0 0x000F424
    _C0 1000000 KP
    _L 0x203EE31C 0x000F4240
    _L 0x20E92D14 0x000F4240
    _C0 20000 PP
    _L 0x20EB2DC0 0x00004e20
    _C0 250 KP (Exit & Reenter KP shop to refresh it)
    _L 0x003EE31C 0x000000FA
    _C0 255 AP After Battle
    _L 0x012EA568 0x000000FF
    _C0 75 AP After Battle
    _L 0x012EA568 0x0000004B
    _C0 9999 Bravery
    _L 0x603633B0 0x0000270F
    _L 0x00050001 0x00000E4C
    _L 0x2000052C 0x00000000
    _C0 all accessories x99
    _L 0x803BEEC6 0x02A00004
    _L 0×00000063 0×00000000
    _L 0x803BE4EE 0x02A00004
    _L 0×00000063 0×00000000
    _C0 AP Max after battle
    _L 0x212EA568 0×00000457
    _C0 Enemy Bravery 0
    _L 0x603633B0 0x00000000
    _L 0x00050001 0x0000002C
    _L 0x2000052C 0x00000000
    _C0 Enemy kill[select]
    _L 0xD0000001 0x10000001
    _L 0x603633B0 0x000F423F
    _L 0x00050001 0x00000038
    _L 0x2000052C 0x00000000
    _C0 Enemy Max HP 100
    _L 0x603633B0 0x00000064
    _L 0x00050001 0x00000034
    _L 0x2000052C 0x00000000
    _C0 Enemy NO assist
    _L 0x603633B0 0x00000000
    _L 0x00050001 0x00000024
    _L 0x2000052C 0x00000000
    _C0 Enemy NO EX
    _L 0x603633B0 0x00000000
    _L 0x00050001 0x00000028
    _L 0x2000052C 0x00000000
    _C0 GIL [MAX]
    _L 0x203BFA00 0x3B9AC9FF
    _C0 Have All Accessories x99
    _L 0x803BEEC6 0x024D0004
    _L 0×00000063 0×00000000
    _C0 Have All Equipments x99
    _L 0x803BE41A 0x02A50004
    _L 0×00000063 0×00000000
    _C0 Infinite Assist
    _L 0x603633B0 0x461C4000
    _L 0x00050001 0x00000E44
    _L 0x2000052C 0x00000000
    _C0 Infinite EX
    _L 0x603633B0 0x461C4000
    _L 0x00050001 0x00000E48
    _L 0x2000052C 0x00000000
    _C0 Infinite HP
    _L 0x603633B0 0x00000000
    _L 0x00050001 0x00000E58
    _L 0x2000052C 0x00000000
    _C0 Level up to 100
    _L 0x603633B0 0x00000064
    _L 0x00050001 0x00000E60
    _L 0x2000052C 0x00000000
    _C0 Mala Bestia Pack
    _L 0x003BF762 0×00000063
    _L 0x003BF7AA 0×00000063
    _L 0x003BF122 0×00000063
    _L 0x003BF7D6 0×00000063
    _L 0x003BF11A 0×00000063
    _L 0x003BF116 0×00000063
    _L 0x003BF112 0×00000063
    _L 0x003BF196 0×00000063
    _L 0x003BF0DE 0×00000063
    _C0 Max Gil
    _L 0x203BFA00 0x05F5E0FF
    _C0 Max HP
    _L 0x603633B0 0x000F423F
    _L 0x00050001 0x00000E54
    _L 0x2000052C 0x00000000
    _C0 Max KP
    _L 0x203EE31C 0x05F5E0FF
    _C0 Max PP
    _L 0x20EB2DC0 0x0098967F
    _C0 PP [MAX]
    _L 0x20EB2DC0 0x05F5E0FF
    _C0 unlock all equipment x99
    _L 0x803BE41A 0x02A00004
    _L 0×00000063 0×00000000
    _C0 unlock all invocations x10
    _L 0x803BF8BF 0x003D0004
    _L 0×00000003 0×00000000
    _L 0x803BF8BD 0x003D0004
    _L 0x0000000A 0×00000000
    _C0 unlock all summons x10 (RISKY)
    _L 0x803BF8BF 0x003D0004
    _L 0x00000003 0x00000000
    _L 0x803BF8BD 0x003D0004
    _L 0x0000000A 0x00000000

    • raing3 says:

      Thanks, please download the file from

      Put it in ms0:/seplugins/TempAR/cheats/ and re-start your game. The cheats should be auto-loaded.

      Also are you certain you are using the same region game as those cheats?

      EDIT: Also for future reference some people put × (multiplication symbol) instead of x (alphabet x) in the cheat codes. This can cause cheats to not be loaded properly… don’t ask me why they do it though cause it seems stupid to me.

  18. Atratus says:

    Hmmm still didn’t load them. The region is the same, as the Game ID is the same as what it shows in the cheat device.

  19. Atratus says:

    Ah, got it. Thanks for your patience. lol

    • raing3 says:

      That’s great to hear, hope you enjoy using TempAR!

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )


Connecting to %s